MODERNIZATION OF THE INSTALLATION MODEL IN ORDER TO BE ABLE TO MEASURE THE DEVIATION OF THE HOLE SURFACE

Article Sidebar

pdf
Published: Nov 16, 2021
Keywords:
roundness gauge geometric shape profile diagram

Main Article Content

Isamov Raim Nosimovich
Assistant Bukhara Engineering-Technological Institute
Zayniyev Xudoyberdi Muhiddinovich
Probationer, Teacher Bukhara Engineering-Technological Institute

Abstract

The article covers modernization of the roundness gauge of BE-20A model, because of which it became possible to measure the deviation from roundness and the deviation of the profile of the longitudinal section

Article Details

How to Cite
Isamov Raim Nosimovich, & Zayniyev Xudoyberdi Muhiddinovich. (2021). MODERNIZATION OF THE INSTALLATION MODEL IN ORDER TO BE ABLE TO MEASURE THE DEVIATION OF THE HOLE SURFACE. Galaxy International Interdisciplinary Research Journal, 9(11), 337–341. Retrieved from https://giirj.com/index.php/giirj/article/view/503
Issue
Vol. 9 No. 11 (2021): GIIRJ
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

References

Yakushev A.I. Interchangeability, standardization and technical measurement. Moscow:Mechanical Engineering, 1986

Balakshin V.S. and other. Interchangeability and technical measurements in mechanical engineering. Moscow: Mechanical Engineering, 1972.